Use of red breaker lock

red breaker lock is an electrical protection lock. Circuit breaker can be used to distribute electricity and manage the plant’s power supply. When the equipment in the factory is in normal operation, it is necessary to lock the circuit breaker to prevent someone from shutting it off to interfere with the normal production activities. When the equipment and lines in the factory need to be repaired, it is also necessary to lock the circuit breaker to protect the life and safety of maintenance personnel. Red breaker lock is used in these cases. The specific small red circuit breaker lockout model can be selected in this page.

LEDS red circuit breaker lockout is easy to install without any tools. The details are as follows:

• Push button type: there are three types: pin in, pin out and pin out wide; For miniature circuit breakers with holes on both sides of the handle, without any tools, just press the button to insert the bottom two pins into two holes of the circuit breaker, and then fasten the safety padlock and safety tag;
• Tie-rod type: suitable for single-pole and multi-pole circuit breakers; During installation, the safety lock of the circuit breaker can be firmly clamped on the pull rod simply by tightening the black self-screw screw and then inserting the safety padlock to prevent the clamping device from loosening;
• Screw type: the circuit breaker lockout slot is stuck to the handle of the circuit breaker, then screw it down with a screwdriver to make it firmly clamped on the handle, and then insert the safety padlock; It is also applicable to single-pole or multipole circuit breaker, there are applicable to distinguish between miniature circuit breaker and molded case circuit breaker;
• Self-screw type: the same as the screw-screw type is stuck to the handle of the circuit breaker. Due to its self-screw head, it can be tightened without screwdriver.