LEDS easy-to-use single-piece ball valve lockout handle design makes it an ideal tool for fixing valve handles in the closed position.

• Large ball valve lockout is available in sizes from 31 mm to 76 mm (up to standard 9.5 mm lock hook diameter);
• Made of powder coated steel with excellent rust resistance;
• Two rows of locking points ensure a firm installation;
• Special for locking off right-angle turning ball valve.

Wedge-Style Ball Valve Lockout LDV33 Operation Method

• 1. Hit the valve handle to the closed state;
• 2. Align the large ball valve lockout with the valve handle and slide it through the valve handle as far as possible;
• 3. Position the steel ball valve lock on the Angle part of the valve handle;
• 4. Squeeze the wedge-style ball valve lockout and valve handle together and insert the safety padlock by providing the most tightly fitting hole to ensure that the disc and valve handle are next to each other and the lower baffle is in contact with the body or pipe.
• Note: Wedge-style ball valve lockout cannot lock the ball valve handle in the “open” position. The hole given in the lock does not indicate the maximum number of padlocks available to lock the valve. To obtain the “nearest point”, only one padlock can be locked. If several padlocks are needed, use lockout hasps.