Use Of Adjustable Ball Valve Lockout

• 1. Hit the valve handle to the closed state;
• 2. Connect the upper cover of the component to the valve handle from the top, and lock the valve body and valve handle;
• 3. Slide the bottom foot of the part to the cover of the part and connect the two halves of the ball valve lock. In this case, the valve handle must be sealed below and to the side of the valve;
• 4. Squeeze the two halves together until the valve is tight;
• 5. Insert the safety padlock into the hole to make it most suitable;
• 6. Ensure that valve handle is tightly sealed and cannot be moved.
• Note: ball valve lock open device has a height limit plate for the standard valve handle. If the valve handle is thicker, a screwdriver can be used to remove the height limit plate at four predetermined breaks.

Engineering plastic ABS material makes ball valve lock open device the best choice for ensuring locking ball valves.

• Adjustable ball valve lockout the pipe diameter of 13mm to 63.5mm. The ball valve can lock the pipe diameter of 13mm to 32mm when open;
• Super tough engineering plastic ABS resists temperatures of -40° C to 148°C;
• Equipping your employees with the right locking tools and warning equipment can save lives, reduce employee turnover, and reduce insurance costs.