• Valve handle lockout is made of advanced engineering plastic ABS material, completely insulated and durable. Excellent fracture resistance and wear resistance, can extend the service life of the product; It can work effectively in extreme environments. It has high crack resistance, wear resistance and extreme temperature change (-46℃ to +180℃).
• Valve handle locking device is divided into two parts, the front end is used to estimate the handle shaft, and the back end is used to fix the butterfly valve handle to prevent the handle from turning.
• The diameter of the lock hole is 9.5mm, suitable for the lock of the lock shackle below 9.5mm.

Valve handle locking device function

• Valve handle locking device a series of different lines by securing the handle to the OFF position. Our ball valve handle lockout will lock pipe diameters from 1/2′ to 8′, while butterfly handle lockout can accommodate up to 2.5 “and 4″ butterfly handles.
• Equipment materials also vary according to the application. There is also a steel standard ball valve lock, but it can only be locked off.

Use of valve handle lockout

• 1. Hit the valve handle to the closed state;
• 2. Connect the upper cover of the component to the valve handle from the top, and lock the valve body and valve handle;
• 3. Slide the bottom foot of the part to the cover of the part and connect the two halves of the ball valve lock. In this case, the valve handle must be sealed below and to the side of the valve;
• 4. Squeeze the two halves together until the valve is tight;
• 5. Insert the safety padlock into the hole to make it most suitable;
• 6. Ensure that valve handle is tightly sealed and cannot be moved.