The Easy to use single-piece standard ball valve lockout design of LEDS makes it an ideal tool for fixing valve handles in the closed position.

• Locking ball valves are available in sizes from 31.8 mm to 76.2 mm (up to standard 9.5 mm lock hook diameter);
• Made of powder coated steel with excellent rust resistance;
• Special for locking off right-angle turning ball valve.

Brady Ball Valve Lockout Operation Method

• 1. Hit the valve handle to the closed state;
• 2. Align the Brady ball valve lockout with the valve handle and slide it through the valve handle as far as possible;
• 3. Position the standard ball valve lockout on the Angle part of the valve handle;
• 4. Squeeze the ball valve lockout and valve handle together and insert the safety padlock by providing the most tightly fitting hole to ensure that the disc and valve handle are next to each other and the lower baffle is in contact with the body or pipe.
• Note: Brady ball valve lockout cannot lock the ball valve handle in the “open” position. The hole given in the lock does not indicate the maximum number of padlocks available to lock the valve. To obtain the “nearest point”, only one padlock can be locked. If several padlocks are needed, use lockout hasps.

Standard ball valve lockout optional

• 1. Determine the number of ball valves in the factory;
• 2. Determine the size of ball valves in the factory and count the number of each size segment;
• 3. Clear the use range of straight ball valve lock;
• 4. Determine the locked frequency of the ball valve in the factory;
• 5. Determine the number of requirements for straight plate ball valve locks and ball valve locks with baffle arm.