The easy to use single-piece metal ball valve lockout design of LEDS makes it an ideal tool for holding valve handles in the closed position.

• Locking ball valves are available in sizes from 6.4 mm to 25 mm (up to standard 9.5 mm lock hook diameter);
• Made of powder coated steel with excellent rust resistance;
• Special for locking off right-angle turning ball valve.

Small Ball Valve Lockout LDV31 Operation Method

• 1. Hit the valve handle to the closed state;
• 2. Align the metal ball valve lockout with the valve handle and slide it through the valve handle as far as possible;
• 3. Position the ball valve lockout on the Angle part of the valve handle;
• 4. Squeeze the small ball valve lockout and valve handle together and insert the safety padlock by providing the most tightly fitting hole to ensure that the disc and valve handle are next to each other and the lower baffle is in contact with the body or pipe.
• Note: small ball valve lockout cannot lock the ball valve handle in the “open” position. The hole given in the lock does not indicate the maximum number of padlocks available to lock the valve. To obtain the “nearest point”, only one padlock can be locked. If several padlocks are needed, use lockout hasps.