• Brady 65329 is made of high strength improved nylon PA material;
• New blade design, less force on the shaped screw, but tight;
• Fix the lock to the switch handle with the shape screw, then fasten the cover to the shape screw to lock it so as not to loosen;
• Wide range of USES – suitable for super large built-in tripping molded case circuit breakers;
• A lock with a maximum diameter of 7.75mm can be used.

Oversized clamp-on breaker lockout useage

• 1. Hit Brady 65329 to the closed position;
• 2. Place oversized clamp-on circuit breaker lockout above the rocker switch to make the black opening around the rocker, and bite the rocker from the bottom with small teeth;
• 3. Rotate the screw wheel clockwise to fix the breaker lock on the rocker;
• Note: Make sure the circuit breaker does not switch back to the “on” position. The rocker of the circuit breaker can still move slightly, but cannot reach the “on” position. If possible, you must reconnect the clamp circuit breaker safety lock or use the attached base if necessary;
• 4. If the circuit breaker lockout is securely mounted on the circuit breaker and is locked to prevent the rocker of the circuit breaker from hitting the “on” position, cover the screw wheel and insert the provided hole into the safety padlock.