• 480/600 volt clamp-on circuit breaker lockout LDC32 is made of strong polypropylene PP and high strength improved nylon PA;
• New blade design, less force on the shaped screw, but tight;
• Fix the lock to the switch handle with the shape screw, then fasten the cover to the shape screw to lock it so as not to loosen;
• A wide range of applications – suitable for a variety of medium – sized built-in tripping plastic case circuit breakers;
• Removable splint (included) further expands the scope of application;
• The base can clamp the bottom of the lock very easily;
• Sliding length splint ensures locking of circuit breaker;
• A lock with a maximum diameter of 7.75mm can be used;
• Three sizes are available, one for 120/277V circuit breakers and the other for 480/600V circuit breakers.

Use method of Brady 65397

• 1. Hit the safety lock of the clamping device circuit breaker to the close position;
• 2. Put the button circuit breaker lock above the rocker switch to make the black opening around the rocker, and bite the rocker from the bottom with small teeth;
• 3. Rotate the screw wheel clockwise to fix the breaker lock on the rocker;
• Note: Make sure the circuit breaker does not switch back to the “on” position. The rocker of the circuit breaker can still move slightly, but cannot reach the “on” position. If possible, you must reconnect the clamp circuit breaker safety lock or use the attached base if necessary;
• 4. If Brady 65397 is securely mounted on the circuit breaker and is locked to prevent the rocker of the circuit breaker from hitting the “on” position, cover the screw wheel and insert the provided hole into the safety padlock.
• Use base: If you can’t insert the lock on the breaker properly or if it leaves too much room for the joystick, use the attached base; Jam the base hook on the triangle-side opening of the breaker lock so that the lock can be attached as described above. The space of the joystick has been significantly reduced.