Safety lockout hasp series, also known as multi padlock hasp, solves the problem of multiple people managing the same machine or pipe and will help your team remember that each energy source is properly isolated. When the machine needs to be repaired, it is necessary to cut off the power supply and lock and tag the power supply to prevent someone from opening the power by mistake and causing harm to maintenance personnel. Our safety lockout hasp come in a variety of sizes and are available with labels and insulation that does not conduct electricity.

Application Of Safety Lockout Hasp

Multi padlock hasp is often used, so we should pay more attention to the usual maintenance; It’s not just wiping the outside of the lock new; The most important part of our maintenance is the lock body connection, we want to make sure that the lock body connection does not enter anything, otherwise it is difficult to open the lock; Not only does this not work, but it adds a lot of trouble to our locks; With the passage of time, there will be oxide layer at the lock body connection; Therefore, if we want to extend the service life of the multi padlock hasp, lubricating oil, graphite powder or pencil powder must be regularly injected into the joint of the lock body.

• 1. It is strictly prohibited to change the hole position of the porous padlock latch or dismantle the parts of the commodity.
• 2. Do not use hydrochloric acid, acid wash surface.
• 3. It is strictly prohibited to use polishing machine grinding and polishing.
• 4. Apply within the load range of the product to prevent damage caused by overload.
• 5. If the product wants to be arc welded, please select the blank for processing to prevent the electroplating layer from burning down at high temperature.